|
|
Post by whitecrow on Aug 21, 2017 17:46:35 GMT -5
Hey guys, long time no see! I recently got into objects creating, and moving and/or creating slots is giving me more of a hard time. I was following the tutorial by orangemittens about how you can copy and paste the X,Y,Z values from Blender, but the slots just won't fit the middle of each soil.  Those numbers and maths in general (lol) are very confusing to me, and I was wondering if any of you guys have any clues about how to make this easier.  |
|
|
|
Post by Leniad on Aug 21, 2017 18:58:59 GMT -5
My suggestion is to highlight the slot (as you have in the image you posted) add a little to X value (0.3119) and just see if it goes in the correct direction to center. Repeat with the Y (-0.30815). Given the image shown, I would delete the slot for trees in the center.
|
|
|
|
Post by brujah on Aug 21, 2017 19:07:05 GMT -5
You can adjust them by very small decimals using the "Transform" button. X = left/right, Y = front/back, and Z= up/down. When looking at the front the little cube will show the "R" For example: With the slot you have highlighted in your picture, click the "Transform" button and a pop-up will show. Enter in the Y box -0.0002 then click the "Offset" button on the pop-up. This will move the slot backward a very tiny bit then you can see the actual direction you need to move your slots. Sniped by Leniad lol |
|
|
|
Post by whitecrow on Aug 22, 2017 5:38:16 GMT -5
Thanks to both of you!  This was just very confusing for me as some of these values need to be extremly low to only slighty move them. I removed the slot for planting a tree now and came across this issue:  "Can't plant this when there's another tree seed in the planter already." I really only just put the seeds for the bushes into the planter. |
|
|
|
Post by orangemittens on Aug 26, 2017 11:32:52 GMT -5
IIRC, container slots like the ones you're working with don't act like deco slots act. I remember running into some issue long ago when trying to work with them, but it was so long ago that I can't remember what the problem was. Maybe post the item so someone can take a look at it. Sorry for the vague answer, but the last time I really looked at slots of this type was in the way back when Studio was still editing slots through the Warehouse.
|
|
|
|
Post by Leniad on Aug 26, 2017 15:49:39 GMT -5
Not entirely sure, but I believe the issue is the footprint size of the full grown plant. I would advise increasing the x and y scale til you get the interior size correct.
|
|
