|
Post by crashdodgers on Mar 14, 2020 23:48:33 GMT -5
First, I could not find a place to post this.
I downloaded and instaled the poseplayer this morning, run up my game and I have encoutered two proplems, 1, the poseplayer is not showing up in the game, 2, what ever is stoping the poseplayer from showing up is also causing problems with the Moschino, camera equipment in that my will not take phots with the camera!
Update om this problem, so far I have been able to determine that the problem is the teleporter being out of date and if you are waiting for Scumbumbo, to fix it then you are out of luck, as sadly Scumbumbo, past away on February 06, 2020. So if someone can fix this mod it would be great, if not please take it down as it does not work any more.
|
|
|
Tattoo
Mar 10, 2020 13:04:46 GMT -5
Post by crashdodgers on Mar 10, 2020 13:04:46 GMT -5
Thank you, I have now ticked the mini map box and the tattoo is working fine, so again thank you.
|
|
|
Post by crashdodgers on Mar 10, 2020 6:40:13 GMT -5
|
|
|
Tattoo
Mar 10, 2020 5:01:58 GMT -5
Post by crashdodgers on Mar 10, 2020 5:01:58 GMT -5
Hi, I would love to share my project with you, but as I am unable to locate the upload button, how can I share it with you?
|
|
|
Tattoo
Mar 10, 2020 1:00:10 GMT -5
Post by crashdodgers on Mar 10, 2020 1:00:10 GMT -5
Hi, the image is saved as a Direct Draw Surface (DDS).
|
|
|
Tattoo
Mar 9, 2020 15:06:04 GMT -5
Post by crashdodgers on Mar 9, 2020 15:06:04 GMT -5
OK, well I checked both S4S and Paint.net settings and the only save setting is BC3 (Linear, DXT5) as saving as anything else does not work with S4S.
And having checked all the different settings in both programs and finding nothing, so now can you please explain how I do just that and please bear in mind that a tattoo is a CAS, item not buy/build.
|
|
|
Tattoo
Mar 9, 2020 10:46:52 GMT -5
Post by crashdodgers on Mar 9, 2020 10:46:52 GMT -5
Hi,
I hope someone can help me with this problem, I have been working on creating a new tattoo, from at couple of of me favourite custom tattoo's.
Every thing was going great until today when I tried it out on a Sim, in the game and I found a very big problem with, i.e. every thing is good up and till I go to save the Sim, when I noticed that the Sims, skintone was missing and had been replaced by an full black tone.
Dose any one know what is happing and to change it and stop it from happing again?
|
|
|
Post by crashdodgers on Nov 9, 2019 0:37:27 GMT -5
Hi, I am looking for a way to convert the "Strangerville Biohazard Suit" into a C.A.S item so that I can display it on a mannequin. I want this for my science lab and as a sell item in a military surplus store for Strangerville. I know that the suit can be found using the debug menu and then place it in a sims inventory for them to wear and I also found it when using S4S, and checking out C.A,S item, but it is the making it visible in C.A.S, is what I need help with.
|
|
|
Post by crashdodgers on Jun 20, 2017 4:24:35 GMT -5
My problem is not about S4S as that is working great, but the error was when making a comment about a download that is not work and as far as I can tale has not worked since EA updated the game back in April, this year.
So my question is this why can I not comment of the download comment section and also how do I get the creator a message about this download not working, with a view to getting it fixed?
And yes I have followed the instructions for trying to fix this if at first it did not work thus trying to report it as not working.
|
|
|
Post by crashdodgers on Jun 19, 2017 11:58:11 GMT -5
First this is the only place I could find to stick this, so sorry if it the wrong place.
Now I just tried to post a comment about a mod on here and the fact that it no longer work works, but instead of post my comment I got a error code: 16, message.
And the mod that I wanted to report as unuseable is teleport sim anywhere mod and the fact that I have not been able to use it since the game was updated back in April, 2017.
|
|
|
Post by crashdodgers on Apr 18, 2017 7:45:38 GMT -5
Thank you for the bad news, I had a feeling that would be the case as I was unable to locate them. So thank you.
|
|
|
Post by crashdodgers on Apr 18, 2017 4:30:43 GMT -5
Hi all,
A want to try and recolour a set of stair railings/fencing, but I am unable to locate the file, I have look in build and objects, but I am still unable to find them.
So dose anyone no what category the can be found under?
Thank you.
|
|
|
Post by crashdodgers on Nov 5, 2016 8:00:14 GMT -5
Well once again I am having trouble do something simple, I did as you said got myself an account with "Imgur", but every time I try to post a picture all I get is a very, very small icon. Any ideas as to what might be the reason?
|
|
|
Post by crashdodgers on Nov 3, 2016 9:19:53 GMT -5
I still do not seem to understand how these tutorials are going to help me with my project. I do not want to make a top out of a full out fit. All I want to do is edit two of the meshes and input a new mesh part. All though these tutorials are great, I just can not find the information that I need, as none of these seem to help, so let explain once again what it is I want to do, i.e. step by step.
First mesh 1, has six parts and the cut no 0000, P1 necklace, P2 band around the chest, P3/P4 arm bands, P5 belt around waist, P6 band around leg. Parts I want to keep are P1, P2, P5, I want to move P5 lower and delete P3, P4, P6.
Second mesh 2, has two parts, P1 top and P2 bottom. I want to delete P1 and replace it with a new mesh top, P2 I need to modify the front by copying the top 1/4 of the mesh and rotating it back to front.
Third mesh is the Sims body, I need to keep?
So I hope you can understand want it is I want to do and why none of the tutorials are helping me, as I can do most things in meshing like all the stuff in the tutorials, but when it comes to the more detailed and complicated bits that is when I get lost. I still do not understand why these 3d programs do not have simple copy/cut/paste and delete function built in as standard in steed of all this press this key then press this key. Why not just use your mouse to drag a box around large area or even a eraser to help with smaller/precision work, i.e. just like programs such as gimp or photoshop.
|
|
|
Post by crashdodgers on Nov 2, 2016 10:40:25 GMT -5
OK, well I am even more confused now then before I started this project, I have found out the the item that I am trying to edit has 3 separate meshes, not the usel single. Now mesh 1 and 2 are the meshes I want to edit, bt am unable to do so even after reading two tutorials and the blender manual.
So basically what I want to do is first with mesh 1 remove 3 of the 6 part completely, then move 2 parts to new locations, once I have done that the I can work on the top half of mesh 2, i.e. remove it and replace it with a new top half. Simple right, wrong I am unable to figure out how to delete the parts I do not want, relocate the parts I want to me and add a part.
Unlike using a picture editing program which which is easy just cut and paste, this 3d stuff is very complicated and by all accounts extremely hard to figure out.
So thank you to Inabadromance, for the links above, but please only reply to this post if you know how to do what I want to do, i.e. delete single parts, relocate single parts, copy and insert a new mesh part.
|
|