|
Post by pandamontok on Feb 2, 2022 0:20:44 GMT -5
prnt.sc/26n7lruI make a new cloth CC. It has a similar problem as previous cloth. Gaps on the splitted meshgroup on the upper arms and chest. I can fix the upper arm mesh group gap, using the previous method, which is, by removing the double vertices of the reference cloth on the problematic areas, then do the data transfer. But this time, the method can't solved the chest gap problem on the chest. I can't figure out the cause. file: drive.google.com/file/d/1u8lYxSyDJYEqCX7fvJF6mEBFYL2wByXc/view?usp=sharing
|
|
|
Post by mauvemorn on Feb 2, 2022 2:28:33 GMT -5
I joined everything together, removed doubles, split everything again, and the problem was fixed. After you split the mesh, rigging, vertex paint and uv_1 must not be altered. There's something crazy going on with your uv_0 and you need to always delete loose geometry, there are random edges flying around. So make sure to fix these issues first before re-doing anything
|
|
|
Post by pandamontok on Feb 2, 2022 4:01:46 GMT -5
Ok, I have made it too. It's fixed. Thank you.
It's really strange. Like, when I tried to fix it before, I did the rejoin, and redo all the steps many times. Well.. I didn't clean it up. Maybe that's where the problem lies.
About uv_0. maybe I did something wrong in the process of exporting from MD to Blender 3.0 to 2.79 somewhere along the process. I retopologized it on MD, hopping, I can keep the straight uv patern. I used Blender 3.0 to further working with the mesh. Because I find the UI is more comfortable to use.
|
|
|
Post by mauvemorn on Feb 2, 2022 14:25:10 GMT -5
Make sure that the mesh is selected with A before you remove doubles You do no need straight uv pattern, you need uvs that correspond to the surface of the 3d model so that no stretching occurs before you export, make sure to always do this Hi. In newer versions of MD you should do this before exporting the mesh: 1). switch to uv editor 2). RMB-click in the window, choose Set uv from pattern alignment 3). then Fit uv to unified (0-1) And this should be the export settings
|
|