|
|
Post by pinky6 on Mar 15, 2017 5:37:17 GMT -5
|
|
|
|
Post by samanthagump on Mar 15, 2017 7:21:04 GMT -5
Hi there! So I'm not sure what the previous problem was, or what all you have done, but that to me looks like it could be the vertex paint, for the skirt riding up. Check this tutorial. As for the spike going up through her head, that is probably a joint issue, check this tutorial I would just copy the weight from a nearby vertex. I hope that helps! |
|
|
|
Post by pinky6 on Mar 15, 2017 16:31:58 GMT -5
thank you! but unfortunately I do not understand much what 'I should do !!!: /
|
|
|
|
Post by samanthagump on Mar 15, 2017 16:58:25 GMT -5
Ok, no worries, first I would change the mode to "Vertex Paint," instead of "Edit Mode," then see if the colors on the dress are even, and if they are not (which is what I suspect) then paint them the same color  I numbered the steps. For step 3, click that little white box, then a new little menu will pop up there, click on the color dropper on it, and then use the dropper to select the same color on the mesh. It should then change to a tool for painting it. Color it so the messed up side matches the good side. |
|
|
|
Post by samanthagump on Mar 15, 2017 17:05:59 GMT -5
As for the spike going through her head, find the problem vertex, then do this:  1. Select the problem vertex 2. Hold shift and click another vertex near it 3. Click "copy," this will copy the weight from the good vertex to the problem one. If that doesnt work, or you need anymore help, let me know! |
|
|
|
Post by pinky6 on Mar 16, 2017 3:47:28 GMT -5
but thank you very much !!!! ^^ You were really kind to explain to me so !!! ^^ I feel like you taught me! and I hope that if I have problems I will be able to ask another for help!  |
|
|
|
Post by samanthagump on Mar 16, 2017 6:34:02 GMT -5
No problem! =)
|
|
|
|
Post by pinky6 on Mar 16, 2017 6:59:01 GMT -5
|
|
|
|
Post by pinky6 on Mar 16, 2017 8:06:01 GMT -5
|
|
|
|
Post by pinky6 on Mar 16, 2017 18:45:17 GMT -5
|
|
|
|
Post by inabadromance on Mar 16, 2017 20:43:52 GMT -5
For the shadow at the bottom end of your mesh, please check this tutorial. I highly suggest you having "smooth shade" in object mode to see the changes right away, and limit selection unticked. As shown here. |
|
|
|
Post by pinky6 on Mar 17, 2017 3:36:33 GMT -5
Hello! and thanks the suggestion'll try to do
|
|
|
|
Post by pinky6 on Mar 18, 2017 19:07:19 GMT -5
|
|
|
|
Post by inabadromance on Mar 19, 2017 17:14:26 GMT -5
You have to select all the legs in edit mode, and clic the remove doubles. |
|
|
|
Post by pinky6 on Mar 20, 2017 4:20:50 GMT -5
thanks very much inabadromance for your help!
|
|
