|
|
Post by lovelydia101 on Sept 28, 2018 2:26:20 GMT -5
Hello, Ive been looking around and I can't seem to find any information on this problem. With this end table when I move the camera or zoom out the object glitches with these wierd marks. I'm not sure what to do as I've never had this problem before.  |
|
|
|
Post by missdelarocha on Sept 28, 2018 8:51:02 GMT -5
Heya - sorry I don't have knowledge about objects, just want to suggest linking your package and blend file so someone can take a look when possible!
Good luck.
|
|
|
|
Post by Leniad on Sept 28, 2018 9:25:43 GMT -5
My suspicion is that you altered the mesh and replaced LOD0 and the original mesh was left in LOD1 and LOD2, so the texture mapping is different for the zoomed out object. I suggest replacing the LOD1 and 2 with your updated mesh
|
|
|
|
Post by lovelydia101 on Sept 28, 2018 23:49:42 GMT -5
|
|
|
|
Post by Memphis Creations on Sept 29, 2018 10:37:34 GMT -5
Hi there,
I just took a look at your blend file, and i noticed 1 thing straight from the start when i was enabling groups.
When enabled group 2, one of the sides vanished. What i would do myself when i would make a end table like this, is instead of extrude an entire block and hide elements of it (which is btw what causes your problem), is using "planks" and connect those together to form the same shape you did now, and then add a little block to go beneath the top plank. If you need an example of what i mean, let me know and i will make an example for you.
|
|
|
|
Post by lovelydia101 on Sept 29, 2018 20:18:55 GMT -5
Hi there, I just took a look at your blend file, and i noticed 1 thing straight from the start when i was enabling groups. When enabled group 2, one of the sides vanished. What i would do myself when i would make a end table like this, is instead of extrude an entire block and hide elements of it (which is btw what causes your problem), is using "planks" and connect those together to form the same shape you did now, and then add a little block to go beneath the top plank. If you need an example of what i mean, let me know and i will make an example for you. Yeah that would be really helpful to see an example. |
|
|
|
Post by Memphis Creations on Sept 30, 2018 4:01:57 GMT -5
Hi there, I just took a look at your blend file, and i noticed 1 thing straight from the start when i was enabling groups. When enabled group 2, one of the sides vanished. What i would do myself when i would make a end table like this, is instead of extrude an entire block and hide elements of it (which is btw what causes your problem), is using "planks" and connect those together to form the same shape you did now, and then add a little block to go beneath the top plank. If you need an example of what i mean, let me know and i will make an example for you. Yeah that would be really helpful to see an example. Example:  |
|
