|
|
Post by shinichi on May 19, 2021 6:24:25 GMT -5
For some reason, certain CC when I take it out on the yard becomes whitish Yellow on live mode. The mesh was imported into a plant actually. For the normal part when on build mode (minus sims) it present its colors as normal as shown here:  But when I use it on live mode, it looses it's color and become Yellowish white:  I tried coming in and out of the game (failed), I tried sending the said file to closed friends online to test (turns out they had no issue with the colors on live mode), and their game happens to be on the latest update (The Oasis one). So I can only assume it is the graphic setting, here are my settings on the game, I did try play around with it, but had proven to be unsuccessful. I hope this issue be resolve as soon as possible, thanks. If one thinks it is the weather, I too tried changing it with cheat to summer and again, the color remain yellowish white for no reason.  |
|
|
|
Post by shinichi on May 23, 2021 7:21:10 GMT -5
Additional info, the mesh was imported through the base game's 'Proud pansies'.
|
|
|
|
Post by godexyposa on May 24, 2021 15:18:27 GMT -5
Plants have a special map that recolours the foliage color. You can read about it here. Your item becomes yellow because of this, I guess. The same problem as yours is described here (vertex color is not the cause of your problem). Solution: Don't use plants for cloning. Also note that cloned plants don't cast shadows. |
|
|
|
Post by shinichi on May 25, 2021 10:23:28 GMT -5
Plants have a special map that recolours the foliage color. You can read about it here. Your item becomes yellow because of this, I guess. The same problem as yours is described here (vertex color is not the cause of your problem). Solution: Don't use plants for cloning. Also note that cloned plants don't cast shadows. So the game is basically reading it like a plant? :-O That explains it. But it is odd that for my friends the color wasnt affected in live mode unlike mine. |
|
|
|
Post by shinichi on May 26, 2021 4:47:41 GMT -5
Plants have a special map that recolours the foliage color. You can read about it here. Your item becomes yellow because of this, I guess. The same problem as yours is described here (vertex color is not the cause of your problem). Solution: Don't use plants for cloning. Also note that cloned plants don't cast shadows. Overall I think you might be right, as I imported another mesh into the pansies, again, the item turn yellow. Update: The only solution was to put in the house, only then the texture go back to normal. Time to use them indoors XD |
|
|
|
Post by godexyposa on May 26, 2021 8:40:08 GMT -5
I still don't see any reason to use plants for cloning.
Btw, the pansies model has a setting that removes flowers when autumn comes. In fact, this setting cuts off the sides of the texture.
Do your friends have the Seasons pack? And if they do, in what season did they test?
Change the season to summer and check again.
|
|
|
|
Post by shinichi on May 26, 2021 11:39:07 GMT -5
I still don't see any reason to use plants for cloning. Btw, the pansies model has a setting that removes flowers when autumn comes. In fact, this setting cuts off the sides of the texture. Do your friends have the Seasons pack? And if they do, in what season did they test? Change the season to summer and check again. I did, it apparent went back to normal. Also it seems like around Spring this happens, and if I put the CC in the greenhouse or indoor, it turns back to normal. |
|
|
|
Post by godexyposa on May 26, 2021 12:12:37 GMT -5
Most plants behave in this way. Place a plant outdoors and indoors and you'll see the same effect.
|
|
|
|
Post by shinichi on May 27, 2021 4:03:11 GMT -5
Most plants behave in this way. Place a plant outdoors and indoors and you'll see the same effect. You are right! Same effect! :0 |
|
|
|
Post by godexyposa on May 27, 2021 6:21:58 GMT -5
Okay, you can turn off the foliage change. Warehouse > Model LOD > Meshes > Edit Items > Entries > Items > Change SeasonalFoliage to 0 ( example with pics). Repeat for all swatches and LODs. |
|
|
|
Post by shinichi on May 30, 2021 4:27:24 GMT -5
Okay, you can turn off the foliage change. Warehouse > Model LOD > Meshes > Edit Items > Entries > Items > Change SeasonalFoliage to 0 ( example with pics). Repeat for all swatches and LODs. It's fix! Tq! :-D |
|
