|
Post by marsmerizing on Nov 14, 2022 4:30:57 GMT -5
hi! I have a problem with this mesh glitching. at first the right arm was glitching too but was fixed after repainting the weight. but the left arm is hard to fix. I went back and forth with the weight paint but nothing happened. So, I'm wondering what causes this and as I was testing it with some pants, I found that with this pants (in the image I attached), the stomach becomes invisible. Can someone explain what went wrong here?
Thank you~<3
|
|
|
Post by dissia on Nov 14, 2022 6:06:22 GMT -5
Hello I would really want to know why this invisible belly problem happen too, for now I know it only happen with bottoms made for male frame that are allowed for female too (you can see difference in legs mesh and belly texture while wearing them) and only with some tops, not for all. So your mesh works good with almost all bottoms except this male ones. As for spikes, always use Clean (All Groups) and Limit Total (Limit to 4) after transfering weights. For me it removed spikes Do not transfer weights and uv_1 to body parts, speparate them before you do this
|
|
|
Post by mauvemorn on Nov 14, 2022 14:23:34 GMT -5
Hi. Try removing "restrict for opposite frame"
Also, you should vertex paint the mesh with 00ff00, the bottom is painted with 3fff00 right now
|
|
|
Post by dissia on Nov 14, 2022 14:38:32 GMT -5
mauvemorn I've tried it with my top, does not help. One more thing I found about this issue is that it happens on tops with transparent cut added
|
|
|
Post by mauvemorn on Nov 14, 2022 14:42:53 GMT -5
mauvemorn I've tried it with my top, does not help. One more thing I found about this issue is that it happens on tops with transparent cut added This is probably 1 in Layer in Region map, try changing it to 0.
|
|
|
Post by dissia on Nov 14, 2022 14:46:42 GMT -5
mauvemorn I've tried it with my top, does not help. One more thing I found about this issue is that it happens on tops with transparent cut added This is probably 1 in Layer in Region map, try changing it to 0. It's working now, so easy fix and I tried to do magic to repair it but did not looked there :D It's weird cause I always put 0 here, do not know why I used 1 this time... Thanks a lot!
|
|