Post by baiqing on May 27, 2023 11:12:51 GMT -5
Hello guys, I hope you can guide me with this problem...
I'm doing some mermaid animations for ww and I'm having trouble taking out and using the canoes.
First of all, I used the default canoe to create this animation and when I had everything ready and was testing it, I found this:
www.dropbox.com/s/gcklz3u9mr1g7fj/problem.PNG?dl=0
It should look like this:
www.dropbox.com/s/36gbzze711rf078/barcabien.PNG?dl=0
So I investigate and ask the owner of the mod and he tells me that I could try geometry state, so I go to sims 4 studio and see this:
www.dropbox.com/s/b5o4ibq3fm89fbg/barca3.PNG?dl=0
The 1 is the one that I use to make the animation and it would be like the rest mode of the canoe, and the rest mode is when it is on the ground.
Number 2 is the canoe with the sails unfurled and how it should look on the water. But I don't know if it's the rig or the mesh that is rotated 90°, apparently it's the mesh and the rig doesn't seem to move anything from the canoe.
www.dropbox.com/s/l17gpues0yo612r/barca1.PNG?dl=0
www.dropbox.com/s/8si26dmt8wevmas/barca2.PNG?dl=0
So I still copy the geometry data from the canoe that is at rest to the one that is going in the water but it still looks bad:
www.dropbox.com/s/8si26dmt8wevmas/barca2.PNG?dl=0
Does anyone have any idea how to occupy the geometry states?
Or any idea how I can solve this problem?
I listen to your ideas, solutions or whatever can be tried.
I'm doing some mermaid animations for ww and I'm having trouble taking out and using the canoes.
First of all, I used the default canoe to create this animation and when I had everything ready and was testing it, I found this:
www.dropbox.com/s/gcklz3u9mr1g7fj/problem.PNG?dl=0It should look like this:
www.dropbox.com/s/36gbzze711rf078/barcabien.PNG?dl=0
So I investigate and ask the owner of the mod and he tells me that I could try geometry state, so I go to sims 4 studio and see this:
www.dropbox.com/s/b5o4ibq3fm89fbg/barca3.PNG?dl=0
The 1 is the one that I use to make the animation and it would be like the rest mode of the canoe, and the rest mode is when it is on the ground.
Number 2 is the canoe with the sails unfurled and how it should look on the water. But I don't know if it's the rig or the mesh that is rotated 90°, apparently it's the mesh and the rig doesn't seem to move anything from the canoe.
www.dropbox.com/s/l17gpues0yo612r/barca1.PNG?dl=0
www.dropbox.com/s/8si26dmt8wevmas/barca2.PNG?dl=0
So I still copy the geometry data from the canoe that is at rest to the one that is going in the water but it still looks bad:
www.dropbox.com/s/8si26dmt8wevmas/barca2.PNG?dl=0
Does anyone have any idea how to occupy the geometry states?
Or any idea how I can solve this problem?
I listen to your ideas, solutions or whatever can be tried.