|
Post by spectachick on Aug 7, 2019 0:07:38 GMT -5
|
|
|
Post by spectachick on Apr 4, 2019 14:28:19 GMT -5
|
|
|
Post by spectachick on Mar 23, 2019 18:49:48 GMT -5
There is an extra line of code that you need to remove from your tuning for it to work. Since you got rid of b_subroot_0 you also need to delete the following code part: It seemed to work fine then. It stayed after placement and seats could be placed up to it. I was in Build mode though so I didn't actually have a Sim try to interact with it. Tank you so much for all of your help!!! It works wonderfully and I did the same on the bar that I made as well. I do have to make sure they can sit though.
|
|
|
Post by spectachick on Mar 22, 2019 18:23:20 GMT -5
|
|
|
Post by spectachick on Mar 21, 2019 22:29:27 GMT -5
|
|
|
Post by spectachick on Mar 15, 2019 17:34:30 GMT -5
bump*
|
|
|
Post by spectachick on Mar 10, 2019 13:37:07 GMT -5
|
|
|
Post by spectachick on Mar 6, 2019 13:02:16 GMT -5
|
|
|
Post by spectachick on Mar 2, 2019 11:23:01 GMT -5
|
|
|
Post by spectachick on Feb 24, 2019 9:56:36 GMT -5
|
|
|
Post by spectachick on Feb 24, 2019 9:36:07 GMT -5
Thank you so much for the help, It worked!!
|
|
|
Post by spectachick on Feb 15, 2019 22:03:08 GMT -5
|
|
|
Post by spectachick on Feb 12, 2019 21:25:58 GMT -5
|
|
|
Post by spectachick on Dec 3, 2018 17:55:45 GMT -5
Hi there, it is actually there :-) I made a screenshot as proof Hope this helps, this screenshot is made of the feast counter, so it should be there. SO sorry to keep worrying you but even though I saw the model lod you screenshotted in that package there is no phong option just says counters and if I choose one of those then there is no SSAOIntensity option. Also some of the counters don't have the same Model Lod that I need like the Island counter so what do I do in that case?
|
|
|
Post by spectachick on Dec 3, 2018 4:15:55 GMT -5
I have a counter that I made a while back but I noticed not too long ago that I can see the lining of the walls and stuff through the counter so its transparent which isn't what I want. I know that when you change meshes you have to go into the ModelLOD and change the phongs from1 to0 but there isn't this type of option for the counters. I used the really shiny ones. The link to the set I am referring to is below www.mediafire.com/file/238w9jhybus4vr6/newluxurioussims4_FEAST_island_counter.zip/file Hi there, Please follow the following tutorial, it should solve your issue :-) Link: TutorialI usually follow hose steps for my furniture but the counters don't have a Model LOD where the group ID is all 0's.
|
|