|
Post by roohjudd on Apr 17, 2024 11:42:01 GMT -5
yes, no matter what i did to the object Thank you, it worked after pay attention to your advice. <3 Cheers... Its solved, was the uv_0 different than uv_1. lol didnt see that before dvmb me. x
|
|
|
Post by roohjudd on Apr 16, 2024 14:16:31 GMT -5
Hm, i dont really get this problem neither on the lowest nor on the highest settings, so cant test what the exact cause of it is. However, your specular and normal maps dont look right. So what you can do is remove both, then check in game. If the issue persists, try deleting uv_1 in all lods ( it differs from uv_0)
So on ur game it worked normal? hm... I'll check spec and normal maps, I back to say if it worked.
|
|
|
Post by roohjudd on Apr 16, 2024 13:37:00 GMT -5
Hi. Share you package package please Hey, I sent you on DM, could you please check
|
|
|
Post by roohjudd on Apr 14, 2024 18:37:19 GMT -5
When I put arrow in the object, it looks alright, but when i take it the object crush, but just indoor, outsite with no roof, it looks ok anyway. >> imgur.com/jwKCsQrSomeone to help me, please.
|
|
|
Post by roohjudd on Jul 2, 2022 16:40:36 GMT -5
hello?
|
|
|
Post by roohjudd on Jun 25, 2022 19:54:37 GMT -5
Is that possible to put any part of object (not light) as emission? I mean, I have a table and I want put some detail like a light emission. How I do that? I tried to clone a lamp and make a table with slots, but it just works like a light not table functions... Help?
|
|
|
Post by roohjudd on Jun 6, 2020 17:43:17 GMT -5
|
|
|
Post by roohjudd on Mar 25, 2019 9:17:44 GMT -5
Don't worry. I've been looking at it. I just haven't had time to check things properly because of work. Your laptop vanishes because your textures are the wrong dimensions. TS4 will only accept dimensions with a power of 4, so for example; 256, 512, 1024, 2048. Your main textures are fine but the all black texture and the pink brushed metal texture are wrong. I don't even know what they are for as I can't see them on the laptop anywhere but they are what is breaking it. Change the pink brushed metal dimensions to 1024 x 512 and the black texture dimensions to 1024 x 2048 and the laptop shows up fine. Since these textures don't seem to be visible anywhere on your finished model (unless I am wrong) you could scale these two textures down quite small to save on file size. You just have to make sure they stick to the valid dimensions mentioned above. So you could have 512 x 256 and 256 x 512 for example. Now that the laptop is visible in game it looks as though there are other issues that will need to be looked at. The shading on the back of the laptop is not flat and the mouse vanishes under the table when Sims use it. Oh thank you, I'll try it, before I'm done, I back here to say it was right or not. By the way, thank you for your time!!! Really!!! <3
|
|
|
Post by roohjudd on Mar 23, 2019 7:52:48 GMT -5
Someone?
|
|
|
Post by roohjudd on Mar 22, 2019 12:37:53 GMT -5
|
|
|
Post by roohjudd on Mar 19, 2019 20:22:09 GMT -5
Hi, guys, I created a computer, then it is vanishing after put on scene/game... Then I have to press "m" to go world view, then I back and it show up as well... Even happen if I just change de color in object mode... Help?
|
|
|
Post by roohjudd on Jan 31, 2019 9:22:40 GMT -5
BrazenLotus Thank you, there is it. I solved it now. Thank you both of you. Now my object looks good. Was duplicated plane as well and also I did that in the specular and bake too. <3
|
|
|
Post by roohjudd on Jan 31, 2019 8:27:04 GMT -5
Hi! The problem lies with your specular map texture. It should not have an alpha map. Go into your image editor, delete the alpha and save as dxt1 no alpha. Also, i highly suggest you bake a proper texture for your object to increase the quality of your model. Check this out THIS GUIDE. It's for CAS but the method is exactly the same for any mesh. inabadromance I did it, but still looks the same trouble. Look at this > mega.nz/#!C8shUKaJ!V_aAYgGHW0YCsGScZUH95fIjTjr8r98OC_OEfgQhwMk sh*t, it supost to be something with my modeling mesh? I do not know, but I always created the sims object, but recently (doing the same as always I did before) all my creations is having this trouble with shadows or something like this.
|
|
|
Post by roohjudd on Jan 30, 2019 18:36:57 GMT -5
but in the blender and sims4studio did not show it up... Help? file to package here: mega.nz/#!2w8XxIbT!Lt6LGSwEFLc68uPKo-ie9y6fdLzyLnvGMVVFkQ0Ql-c
|
|
|
Post by roohjudd on Oct 22, 2018 15:35:07 GMT -5
oh, thank you, I'll try it by now. <3
|
|